Metadata-Version: 2.4
Name: fabprint
Version: 0.1.104
Summary: Headless 3D print pipeline: arrange, orient, slice, and send to printer from a TOML config
Project-URL: Homepage, https://github.com/pzfreo/fabprint
Project-URL: Repository, https://github.com/pzfreo/fabprint
Project-URL: Issues, https://github.com/pzfreo/fabprint/issues
Author-email: Paul Fremantle <paul@fremantle.org>
License:                                  Apache License
                                   Version 2.0, January 2004
                                http://www.apache.org/licenses/
        
           TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
        
           1. Definitions.
        
              "License" shall mean the terms and conditions for use, reproduction,
              and distribution as defined by Sections 1 through 9 of this document.
        
              "Licensor" shall mean the copyright owner or entity authorized by
              the copyright owner that is granting the License.
        
              "Legal Entity" shall mean the union of the acting entity and all
              other entities that control, are controlled by, or are under common
              control with that entity. For the purposes of this definition,
              "control" means (i) the power, direct or indirect, to cause the
              direction or management of such entity, whether by contract or
              otherwise, or (ii) ownership of fifty percent (50%) or more of the
              outstanding shares, or (iii) beneficial ownership of such entity.
        
              "You" (or "Your") shall mean an individual or Legal Entity
              exercising permissions granted by this License.
        
              "Source" form shall mean the preferred form for making modifications,
              including but not limited to software source code, documentation
              source, and configuration files.
        
              "Object" form shall mean any form resulting from mechanical
              transformation or translation of a Source form, including but
              not limited to compiled object code, generated documentation,
              and conversions to other media types.
        
              "Work" shall mean the work of authorship, whether in Source or
              Object form, made available under the License, as indicated by a
              copyright notice that is included in or attached to the work
              (an example is provided in the Appendix below).
        
              "Derivative Works" shall mean any work, whether in Source or Object
              form, that is based on (or derived from) the Work and for which the
              editorial revisions, annotations, elaborations, or other modifications
              represent, as a whole, an original work of authorship. For the purposes
              of this License, Derivative Works shall not include works that remain
              separable from, or merely link (or bind by name) to the interfaces of,
              the Work and Derivative Works thereof.
        
              "Contribution" shall mean any work of authorship, including
              the original version of the Work and any modifications or additions
              to that Work or Derivative Works thereof, that is intentionally
              submitted to Licensor for inclusion in the Work by the copyright owner
              or by an individual or Legal Entity authorized to submit on behalf of
              the copyright owner. For the purposes of this definition, "submitted"
              means any form of electronic, verbal, or written communication sent
              to the Licensor or its representatives, including but not limited to
              communication on electronic mailing lists, source code control systems,
              and issue tracking systems that are managed by, or on behalf of, the
              Licensor for the purpose of discussing and improving the Work, but
              excluding communication that is conspicuously marked or otherwise
              designated in writing by the copyright owner as "Not a Contribution."
        
              "Contributor" shall mean Licensor and any individual or Legal Entity
              on behalf of whom a Contribution has been received by Licensor and
              subsequently incorporated within the Work.
        
           2. Grant of Copyright License. Subject to the terms and conditions of
              this License, each Contributor hereby grants to You a perpetual,
              worldwide, non-exclusive, no-charge, royalty-free, irrevocable
              copyright license to reproduce, prepare Derivative Works of,
              publicly display, publicly perform, sublicense, and distribute the
              Work and such Derivative Works in Source or Object form.
        
           3. Grant of Patent License. Subject to the terms and conditions of
              this License, each Contributor hereby grants to You a perpetual,
              worldwide, non-exclusive, no-charge, royalty-free, irrevocable
              (except as stated in this section) patent license to make, have made,
              use, offer to sell, sell, import, and otherwise transfer the Work,
              where such license applies only to those patent claims licensable
              by such Contributor that are necessarily infringed by their
              Contribution(s) alone or by combination of their Contribution(s)
              with the Work to which such Contribution(s) was submitted. If You
              institute patent litigation against any entity (including a
              cross-claim or counterclaim in a lawsuit) alleging that the Work
              or a Contribution incorporated within the Work constitutes direct
              or contributory patent infringement, then any patent licenses
              granted to You under this License for that Work shall terminate
              as of the date such litigation is filed.
        
           4. Redistribution. You may reproduce and distribute copies of the
              Work or Derivative Works thereof in any medium, with or without
              modifications, and in Source or Object form, provided that You
              meet the following conditions:
        
              (a) You must give any other recipients of the Work or
                  Derivative Works a copy of this License; and
        
              (b) You must cause any modified files to carry prominent notices
                  stating that You changed the files; and
        
              (c) You must retain, in the Source form of any Derivative Works
                  that You distribute, all copyright, patent, trademark, and
                  attribution notices from the Source form of the Work,
                  excluding those notices that do not pertain to any part of
                  the Derivative Works; and
        
              (d) If the Work includes a "NOTICE" text file as part of its
                  distribution, then any Derivative Works that You distribute must
                  include a readable copy of the attribution notices contained
                  within such NOTICE file, excluding those notices that do not
                  pertain to any part of the Derivative Works, in at least one
                  of the following places: within a NOTICE text file distributed
                  as part of the Derivative Works; within the Source form or
                  documentation, if provided along with the Derivative Works; or,
                  within a display generated by the Derivative Works, if and
                  wherever such third-party notices normally appear. The contents
                  of the NOTICE file are for informational purposes only and
                  do not modify the License. You may add Your own attribution
                  notices within Derivative Works that You distribute, alongside
                  or as an addendum to the NOTICE text from the Work, provided
                  that such additional attribution notices cannot be construed
                  as modifying the License.
        
              You may add Your own copyright statement to Your modifications and
              may provide additional or different license terms and conditions
              for use, reproduction, or distribution of Your modifications, or
              for any such Derivative Works as a whole, provided Your use,
              reproduction, and distribution of the Work otherwise complies with
              the conditions stated in this License.
        
           5. Submission of Contributions. Unless You explicitly state otherwise,
              any Contribution intentionally submitted for inclusion in the Work
              by You to the Licensor shall be under the terms and conditions of
              this License, without any additional terms or conditions.
              Notwithstanding the above, nothing herein shall supersede or modify
              the terms of any separate license agreement you may have executed
              with Licensor regarding such Contributions.
        
           6. Trademarks. This License does not grant permission to use the trade
              names, trademarks, service marks, or product names of the Licensor,
              except as required for reasonable and customary use in describing the
              origin of the Work and reproducing the content of the NOTICE file.
        
           7. Disclaimer of Warranty. Unless required by applicable law or
              agreed to in writing, Licensor provides the Work (and each
              Contributor provides its Contributions) on an "AS IS" BASIS,
              WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
              implied, including, without limitation, any warranties or conditions
              of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
              PARTICULAR PURPOSE. You are solely responsible for determining the
              appropriateness of using or redistributing the Work and assume any
              risks associated with Your exercise of permissions under this License.
        
           8. Limitation of Liability. In no event and under no legal theory,
              whether in tort (including negligence), contract, or otherwise,
              unless required by applicable law (such as deliberate and grossly
              negligent acts) or agreed to in writing, shall any Contributor be
              liable to You for damages, including any direct, indirect, special,
              incidental, or consequential damages of any character arising as a
              result of this License or out of the use or inability to use the
              Work (including but not limited to damages for loss of goodwill,
              work stoppage, computer failure or malfunction, or any and all
              other commercial damages or losses), even if such Contributor
              has been advised of the possibility of such damages.
        
           9. Accepting Warranty or Additional Liability. While redistributing
              the Work or Derivative Works thereof, You may choose to offer,
              and charge a fee for, acceptance of support, warranty, indemnity,
              or other liability obligations and/or rights consistent with this
              License. However, in accepting such obligations, You may act only
              on Your own behalf and on Your sole responsibility, not on behalf
              of any other Contributor, and only if You agree to indemnify,
              defend, and hold each Contributor harmless for any liability
              incurred by, or claims asserted against, such Contributor by reason
              of your accepting any such warranty or additional liability.
        
           END OF TERMS AND CONDITIONS
        
           APPENDIX: How to apply the Apache License to your work.
        
              To apply the Apache License to your work, attach the following
              boilerplate notice, with the fields enclosed by brackets "[]"
              replaced with your own identifying information. (Don't include
              the brackets!)  The text should be enclosed in the appropriate
              comment syntax for the file format. We also recommend that a
              file or class name and description of purpose be included on the
              same "printed page" as the copyright notice for easier
              identification within third-party archives.
        
           Copyright 2025 Paul Fremantle
        
           Licensed under the Apache License, Version 2.0 (the "License");
           you may not use this file except in compliance with the License.
           You may obtain a copy of the License at
        
               http://www.apache.org/licenses/LICENSE-2.0
        
           Unless required by applicable law or agreed to in writing, software
           distributed under the License is distributed on an "AS IS" BASIS,
           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
           See the License for the specific language governing permissions and
           limitations under the License.
License-File: LICENSE
Keywords: 3d-printing,3mf,bambu,gcode,orcaslicer,pipeline,slicer
Classifier: Development Status :: 4 - Beta
Classifier: Intended Audience :: Developers
Classifier: Intended Audience :: Manufacturing
Classifier: License :: OSI Approved :: Apache Software License
Classifier: Programming Language :: Python :: 3.11
Classifier: Programming Language :: Python :: 3.12
Classifier: Programming Language :: Python :: 3.13
Classifier: Programming Language :: Python :: 3.14
Classifier: Topic :: Scientific/Engineering
Requires-Python: >=3.11
Requires-Dist: bambu-lab-cloud-api
Requires-Dist: bambulabs-api>=2.6.0
Requires-Dist: build123d>=0.10.0
Requires-Dist: defusedxml>=0.7.0
Requires-Dist: rectpack>=0.2.0
Requires-Dist: requests>=2.28
Requires-Dist: sf-hamilton>=1.82.0
Requires-Dist: simple-term-menu>=1.6.6
Requires-Dist: trimesh[easy]>=4.0.0
Requires-Dist: typer>=0.15.0
Requires-Dist: watchfiles>=1.0.0
Provides-Extra: dev
Requires-Dist: mypy>=1.10.0; extra == 'dev'
Requires-Dist: packaging>=23.0; extra == 'dev'
Requires-Dist: pytest>=8.0.0; extra == 'dev'
Requires-Dist: ruff>=0.4.0; extra == 'dev'
Description-Content-Type: text/markdown

![fabprint pipeline](https://raw.githubusercontent.com/pzfreo/fabprint/main/docs/images/pipeline.png)

# fabprint

[![PyPI version](https://img.shields.io/pypi/v/fabprint)](https://pypi.org/project/fabprint/)
[![CI](https://github.com/pzfreo/fabprint/actions/workflows/ci.yml/badge.svg)](https://github.com/pzfreo/fabprint/actions/workflows/ci.yml)
[![Python 3.11+](https://img.shields.io/pypi/pyversions/fabprint)](https://pypi.org/project/fabprint/)
[![License: Apache 2.0](https://img.shields.io/badge/license-Apache%202.0-blue.svg)](LICENSE)

3D printing has a reproducibility problem:

- Slicer settings get lost between sessions or through human error
- Printer configs drift across machines and slicer versions
- There's no way to version, diff, or audit a print job

**fabprint addresses this with declarative, version-controlled builds.** Define your print like code — parts, slicer settings, and printer config in a single TOML file — and fabprint handles the rest: arrangement, slicing, and dispatch to the printer.

Same repo → same G-code → consistent, repeatable prints across machines. 
fabprint produces identical G-code for a given config; physical results may still vary with hardware and materials.

Built for engineers, makers, and teams who treat their prints like software. Works with STL, STEP, and 3MF files, and pairs naturally with code-CAD tools like [build123d](https://github.com/gumyr/build123d), [OpenSCAD](https://openscad.org), and [cadquery](https://github.com/cadquery/cadquery).

```toml
# fabprint.toml — a multi-part print with slicer overrides

[[parts]]
file = "enclosure_base.step"
orient = "flat"
filament = 1                    # AMS slot 1: PETG-CF

[[parts]]
file = "enclosure_lid.step"
orient = "upright"
filament = 1

[[parts]]
file = "button_cap.stl"
copies = 4
filament = 2                    # AMS slot 2: PLA

[slicer]
engine = "orca"
version = "2.3.1"               # pinned for reproducibility
printer = "Bambu Lab P1S 0.4 nozzle"
process = "0.20mm Standard @BBL X1C"
filaments = ["Generic PETG-CF @base", "Generic PLA @base"]

[slicer.overrides]
sparse_infill_density = "25%"
enable_support = 1
brim_type = "auto_brim"

[printer]
name = "workshop"
```

```bash
fabprint run        # arrange → slice → print, one command
```

```
✔ Loaded 3 parts
✔ Arranged 3 parts onto plate  (256×256mm)
✔ Plate exported
✔ Sliced with OrcaSlicer 2.3.1  48s
✔ 3h 42m, 24.6g filament
✔ Sent to printer "workshop"
```

## How it works

1. **Define** parts + settings in `fabprint.toml`
2. **Arrange** — fabprint bin-packs models onto the build plate
3. **Slice** — using a pinned OrcaSlicer version (via Docker) for identical G-code across machines
4. **Print** — sends identical G-code to your printer

Everything is declared in a single TOML file — git-friendly, diffable, and committable alongside your CAD files. Lock the slicer version, pin the profiles, and the output is reproducible on any machine or in CI.

### Why not just use OrcaSlicer CLI?

OrcaSlicer CLI is great for slicing a prepared plate. fabprint builds a reproducible pipeline around it:

- **Arrangement** — bin-packs multiple STLs onto the build plate (OrcaSlicer CLI has no arrange step)
- **Multi-part filament mapping** — per-part filament slot assignment and paint color preservation, injected into the 3MF metadata
- **Reproducible builds** — pin slicer profiles into your repo + lock OrcaSlicer version in Docker = identical gcode on any machine
- **Partial execution** — `--until plate` to inspect layout, `--only slice` to re-slice, `--dry-run` to test everything
- **Send to printer** — Bambu LAN, Bambu Cloud, and Moonraker/Klipper (experimental), with live status monitoring. PrusaLink and OctoPrint support is on the roadmap
- **Headless Docker slicing** — no GUI, no display server, works in CI, uses a specific OrcaSlicer version

## Quick start

**Prerequisites:** Python 3.11+ and either [Docker](https://docs.docker.com/get-docker/) or a local [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) install. Docker is required for Bambu Cloud printing and **recommended for reproducible slicing** — it lets you pin the exact OrcaSlicer version so every machine produces identical G-code.

```bash
pip install fabprint
# or, to install as an isolated CLI tool:
pipx install fabprint
```

Generate a config with the interactive wizard, or dump a commented template:

```bash
fabprint setup                      # configures printer targets
fabprint init                       # interactive wizard — discovers profiles and CAD files creates TOML
fabprint init --template            # dump a commented template (works on all platforms incl. Windows)
```

> **Note:** `fabprint init` (interactive wizard) requires a Unix terminal (Linux, macOS, or WSL). On Windows, use `fabprint init --template` and edit the generated file manually.
Or create `fabprint.toml` by hand (see [full config reference](https://github.com/pzfreo/fabprint/blob/main/docs/config.md)):

```toml
[pipeline]
stages = ["load", "arrange", "plate", "slice", "print"]

[printer]
name = "workshop"       # references ~/.config/fabprint/credentials.toml

[plate]
size = [256, 256]       # build plate dimensions in mm
padding = 5.0

[slicer]
engine = "orca"
version = "2.3.1"       # pin OrcaSlicer version for reproducibility
printer = "Bambu Lab P1S 0.4 nozzle"
process = "0.20mm Standard @BBL X1C"

[slicer.overrides]      # simple way to define print settings without editing JSON
sparse_infill_density = "30%"       # stronger infill
wall_loops = 3                       # extra wall strength
enable_support = 1
brim_type = "auto_brim"             # help adhesion
curr_bed_type = "Textured PEI Plate"

[[parts]]               # define multiple parts using STEP, STL or 3MF inputs
file = "frame.step"
rotate = [180, 0, 0]    # flip so mounting plate faces down
filament = "Generic PETG-CF @base"

[[parts]]
file = "wheel.stl"
copies = 5
orient = "upright"
filament = "Generic PETG-CF @base"
```

Run it (see [full CLI reference](https://github.com/pzfreo/fabprint/blob/main/docs/cli.md)):

```bash
fabprint run                   # arrange, slice and send to printer
fabprint run --until slice     # stop after slicing
fabprint run --dry-run         # full pipeline without sending to printer
```
The arrangement (`plate`) stage generates a `plate_preview.3mf` — open it in any 3MF viewer to check placement:

![plate preview](https://raw.githubusercontent.com/pzfreo/fabprint/main/docs/images/plate_preview.png)

## Reproducibility

Pin profiles into your repo so builds are identical across machines:

```bash
fabprint profiles pin          # copies slicer profiles into ./profiles/
git add profiles/              # commit to lock them
```

Combined with `version = "2.3.1"` in `[slicer]` (which pins the Docker image), the same config always produces the same gcode.

### CI/CD example

Automate slicing in GitHub Actions — push a commit, get G-code as a build artifact with print metrics on your PR:

```yaml
# .github/workflows/slice.yml
name: Slice
on: [push, pull_request]
jobs:
  slice:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
      - uses: pzfreo/fabprint@main
        with:
          orca-version: "2.3.1"
```

The action slices your model, uploads G-code as an artifact, and posts print time / filament stats as a PR comment. See [`action/README.md`](action/README.md) for all options.

## CLI overview

```bash
fabprint init                        # interactive config wizard
fabprint init --template             # dump commented TOML template
fabprint validate                    # check config for issues
fabprint setup                       # set up a printer (credentials + connection type)
fabprint run                         # full pipeline
fabprint run --until plate           # stop after plating
fabprint run --only slice            # run just one stage
fabprint run --dry-run               # everything except sending to printer
fabprint watch                       # re-run pipeline when input files change
fabprint status                      # query printer status
fabprint status -w                   # live printer dashboard
fabprint profiles list               # list available slicer profiles
fabprint profiles pin                # pin profiles for reproducible builds
```

![fabprint status --watch](https://raw.githubusercontent.com/pzfreo/fabprint/main/docs/images/watch.png)

## Credentials

Printer credentials are stored in `~/.config/fabprint/credentials.toml`, created by `fabprint setup`. The file is set to `600` permissions (owner read/write only) and is never committed to your repo — only the printer *name* appears in `fabprint.toml`. Credentials can also be supplied via environment variables (`BAMBU_PRINTER_IP`, `BAMBU_ACCESS_CODE`, `BAMBU_SERIAL`) for CI or shared environments.

## Documentation

- [CLI reference](https://github.com/pzfreo/fabprint/blob/main/docs/cli.md) — all commands, flags, and pipeline stages
- [Config reference](https://github.com/pzfreo/fabprint/blob/main/docs/config.md) — complete TOML format
- [Developing](https://github.com/pzfreo/fabprint/blob/main/docs/developing.md) — setup, testing, architecture

## License

Apache 2.0
