Metadata-Version: 2.4
Name: py_ballisticcalc.exts
Version: 2.1.0
Summary: LGPL library for small arms ballistic calculations (Python 3)
Author-email: o-murphy <thehelixpg@gmail.com>, dbookstaber <bookstaber@gmail.com>
License:                    GNU LESSER GENERAL PUBLIC LICENSE
                               Version 3, 29 June 2007
        
         Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
         Everyone is permitted to copy and distribute verbatim copies
         of this license document, but changing it is not allowed.
        
        
          This version of the GNU Lesser General Public License incorporates
        the terms and conditions of version 3 of the GNU General Public
        License, supplemented by the additional permissions listed below.
        
          0. Additional Definitions.
        
          As used herein, "this License" refers to version 3 of the GNU Lesser
        General Public License, and the "GNU GPL" refers to version 3 of the GNU
        General Public License.
        
          "The Library" refers to a covered work governed by this License,
        other than an Application or a Combined Work as defined below.
        
          An "Application" is any work that makes use of an interface provided
        by the Library, but which is not otherwise based on the Library.
        Defining a subclass of a class defined by the Library is deemed a mode
        of using an interface provided by the Library.
        
          A "Combined Work" is a work produced by combining or linking an
        Application with the Library.  The particular version of the Library
        with which the Combined Work was made is also called the "Linked
        Version".
        
          The "Minimal Corresponding Source" for a Combined Work means the
        Corresponding Source for the Combined Work, excluding any source code
        for portions of the Combined Work that, considered in isolation, are
        based on the Application, and not on the Linked Version.
        
          The "Corresponding Application Code" for a Combined Work means the
        object code and/or source code for the Application, including any data
        and utility programs needed for reproducing the Combined Work from the
        Application, but excluding the System Libraries of the Combined Work.
        
          1. Exception to Section 3 of the GNU GPL.
        
          You may convey a covered work under sections 3 and 4 of this License
        without being bound by section 3 of the GNU GPL.
        
          2. Conveying Modified Versions.
        
          If you modify a copy of the Library, and, in your modifications, a
        facility refers to a function or data to be supplied by an Application
        that uses the facility (other than as an argument passed when the
        facility is invoked), then you may convey a copy of the modified
        version:
        
           a) under this License, provided that you make a good faith effort to
           ensure that, in the event an Application does not supply the
           function or data, the facility still operates, and performs
           whatever part of its purpose remains meaningful, or
        
           b) under the GNU GPL, with none of the additional permissions of
           this License applicable to that copy.
        
          3. Object Code Incorporating Material from Library Header Files.
        
          The object code form of an Application may incorporate material from
        a header file that is part of the Library.  You may convey such object
        code under terms of your choice, provided that, if the incorporated
        material is not limited to numerical parameters, data structure
        layouts and accessors, or small macros, inline functions and templates
        (ten or fewer lines in length), you do both of the following:
        
           a) Give prominent notice with each copy of the object code that the
           Library is used in it and that the Library and its use are
           covered by this License.
        
           b) Accompany the object code with a copy of the GNU GPL and this license
           document.
        
          4. Combined Works.
        
          You may convey a Combined Work under terms of your choice that,
        taken together, effectively do not restrict modification of the
        portions of the Library contained in the Combined Work and reverse
        engineering for debugging such modifications, if you also do each of
        the following:
        
           a) Give prominent notice with each copy of the Combined Work that
           the Library is used in it and that the Library and its use are
           covered by this License.
        
           b) Accompany the Combined Work with a copy of the GNU GPL and this license
           document.
        
           c) For a Combined Work that displays copyright notices during
           execution, include the copyright notice for the Library among
           these notices, as well as a reference directing the user to the
           copies of the GNU GPL and this license document.
        
           d) Do one of the following:
        
               0) Convey the Minimal Corresponding Source under the terms of this
               License, and the Corresponding Application Code in a form
               suitable for, and under terms that permit, the user to
               recombine or relink the Application with a modified version of
               the Linked Version to produce a modified Combined Work, in the
               manner specified by section 6 of the GNU GPL for conveying
               Corresponding Source.
        
               1) Use a suitable shared library mechanism for linking with the
               Library.  A suitable mechanism is one that (a) uses at run time
               a copy of the Library already present on the user's computer
               system, and (b) will operate properly with a modified version
               of the Library that is interface-compatible with the Linked
               Version.
        
           e) Provide Installation Information, but only if you would otherwise
           be required to provide such information under section 6 of the
           GNU GPL, and only to the extent that such information is
           necessary to install and execute a modified version of the
           Combined Work produced by recombining or relinking the
           Application with a modified version of the Linked Version. (If
           you use option 4d0, the Installation Information must accompany
           the Minimal Corresponding Source and Corresponding Application
           Code. If you use option 4d1, you must provide the Installation
           Information in the manner specified by section 6 of the GNU GPL
           for conveying Corresponding Source.)
        
          5. Combined Libraries.
        
          You may place library facilities that are a work based on the
        Library side by side in a single library together with other library
        facilities that are not Applications and are not covered by this
        License, and convey such a combined library under terms of your
        choice, if you do both of the following:
        
           a) Accompany the combined library with a copy of the same work based
           on the Library, uncombined with any other library facilities,
           conveyed under the terms of this License.
        
           b) Give prominent notice with the combined library that part of it
           is a work based on the Library, and explaining where to find the
           accompanying uncombined form of the same work.
        
          6. Revised Versions of the GNU Lesser General Public License.
        
          The Free Software Foundation may publish revised and/or new versions
        of the GNU Lesser General Public License from time to time. Such new
        versions will be similar in spirit to the present version, but may
        differ in detail to address new problems or concerns.
        
          Each version is given a distinguishing version number. If the
        Library as you received it specifies that a certain numbered version
        of the GNU Lesser General Public License "or any later version"
        applies to it, you have the option of following the terms and
        conditions either of that published version or of any later version
        published by the Free Software Foundation. If the Library as you
        received it does not specify a version number of the GNU Lesser
        General Public License, you may choose any version of the GNU Lesser
        General Public License ever published by the Free Software Foundation.
        
          If the Library as you received it specifies that a proxy can decide
        whether future versions of the GNU Lesser General Public License shall
        apply, that proxy's public statement of acceptance of any version is
        permanent authorization for you to choose that version for the
        Library.
        
Project-URL: Homepage, https://github.com/o-murphy/py_ballisticcalc
Project-URL: Bug Reports, https://github.com/o-murphy/py_ballisticcalc/issues
Project-URL: Source, https://github.com/o-murphy/py_ballisticcalc
Keywords: py_ballisticcalc,ballistics,Cython,ballistic calculator,python,python3
Classifier: Intended Audience :: Developers
Classifier: Natural Language :: English
Classifier: Programming Language :: Python
Classifier: Topic :: Software Development :: Libraries :: Python Modules
Classifier: Programming Language :: Python :: 3
Classifier: Programming Language :: Python :: 3 :: Only
Classifier: Programming Language :: Python :: 3.9
Classifier: Programming Language :: Python :: 3.10
Classifier: Programming Language :: Python :: 3.11
Classifier: Programming Language :: Python :: 3.12
Classifier: Operating System :: OS Independent
Classifier: Programming Language :: Python :: Implementation :: CPython
Requires-Python: >=3.9
Description-Content-Type: text/markdown
License-File: LICENSE
Provides-Extra: dev
Requires-Dist: cython; extra == "dev"
Requires-Dist: build; extra == "dev"
Requires-Dist: setuptools; extra == "dev"
Requires-Dist: cibuildwheel; extra == "dev"
Dynamic: license-file

# BallisticCalculator
LGPL library for small arms ballistic calculations based on point-mass (3 DoF) plus spin drift.

### Table of contents
* **[Installation](#installation)**
  * [Latest stable](#latest-stable-release-from-pypi)

  [//]: # (    * [From sources]&#40;#installing-from-sources&#41;)
  [//]: # (  * [Clone and build]&#40;#clone-and-build&#41;)

* **[Usage](#usage)**
  * [Simple example](#simple-zero)
  * [Plot trajectory](#plot-trajectory-with-danger-space)
  * [Range card](#plot-trajectory-with-danger-space)
  * [Complex example](#complex-example)
  * [Jupyter notebook](Example.ipynb)
  * [Preferences](#preferences)
  * [Units of measure](#units)

  [//]: # (  * [An example of calculations]&#40;#an-example-of-calculations&#41;)
  [//]: # (  * [Output example]&#40;#example-of-the-formatted-output&#41;)
* **[Concepts](#concepts)**
* **[Older versions]()**
  * [v1.1.x](https://github.com/o-murphy/py_ballisticcalc/tree/v1.1.4)
  * [v1.0.x](https://github.com/o-murphy/py_ballisticcalc/tree/v1.0.12)
* **[Contributors](#contributors)**
* **[About project](#about-project)**

# Installation

[//]: # (```python setup.py build_ext --inplace```)

[//]: # (## Latest stable release from pypi)
```shell
pip install py-ballisticcalc

# Using precompiled backend (improves performance)
pip install py-ballisticcalc[exts]

# Using matplotlib and pandas uses additional dependencies
pip install py-ballisticcalc[charts]
```

# Usage
**See [Example.ipynb](Example.ipynb) for detailed illustrations of all features and usage.**

```python
# Uncomment pyximport to compile instead of running pure python
#import pyximport; pyximport.install(language_level=3)

from py_ballisticcalc import *
```

## Simple Zero
```python
# Establish 100-yard zero for a standard .308, G7 bc=0.22, muzzle velocity 2600fps
zero = Shot(weapon=Weapon(sight_height=2), ammo=Ammo(DragModel(0.22, TableG7), mv=Velocity.FPS(2600)))
calc = Calculator()
zero_distance = Distance.Yard(100)
zero_elevation = calc.set_weapon_zero(zero, zero_distance)
print(f'Barrel elevation for {zero_distance} zero: {zero_elevation << PreferredUnits.adjustment}')
```

    Barrel elevation for 100.0yd zero: 1.33mil

## Plot Trajectory with Danger Space
```python
# Plot trajectory out to 500 yards
shot_result = calc.fire(zero, trajectory_range=500, extra_data=True)
ax = shot_result.plot()
# Find danger space for a half-meter tall target at 300 yards
danger_space = shot_result.danger_space(Distance.Yard(300), Distance.Meter(.5))
print(danger_space)
danger_space.overlay(ax)  # Highlight danger space on the plot
plt.show()
```

    Danger space at 300.0yd for 19.7inch tall target ranges from 217.1yd to 355.7yd
![plot](doc/TrajectoryPlot1.png)


## Print Range Card
```python
# Range card for this zero with 5mph cross-wind from left to right
zero.winds = [Wind(Velocity.MPH(5), Angular.OClock(3))]
range_card = calc.fire(zero, trajectory_range=1000)
range_card.dataframe().to_clipboard()
range_card.dataframe(True)[['distance', 'velocity', 'mach', 'time', 'target_drop', 'drop_adj', 'windage', 'windage_adj']].set_index('distance')
```

| distance | velocity | mach | time | target_drop | drop_adj | windage | windage_adj |
| -------- | -------- | ---- | ---- | ----------- | -------- | ------- | ----------- |
| 0.0 yd | 2600.0 ft/s | 2.33 mach | 0.000 s | -2.0 inch | 0.00 mil | -0.0 inch | 0.00 mil |
| 100.0 yd | 2398.1 ft/s | 2.15 mach | 0.120 s | -0.0 inch | -0.00 mil | 0.4 inch | 0.12 mil |
| 200.0 yd | 2205.5 ft/s | 1.98 mach | 0.251 s | -4.1 inch | -0.57 mil | 1.7 inch | 0.25 mil |
| 300.0 yd | 2022.3 ft/s | 1.81 mach | 0.393 s | -15.3 inch | -1.44 mil | 4.1 inch | 0.39 mil |
| 400.0 yd | 1847.5 ft/s | 1.65 mach | 0.548 s | -35.0 inch | -2.48 mil | 7.6 inch | 0.54 mil |
| 500.0 yd | 1680.1 ft/s | 1.50 mach | 0.718 s | -65.0 inch | -3.68 mil | 12.4 inch | 0.70 mil |
| 600.0 yd | 1519.5 ft/s | 1.36 mach | 0.906 s | -107.3 inch | -5.06 mil | 18.8 inch | 0.89 mil |
| 700.0 yd | 1366.0 ft/s | 1.22 mach | 1.114 s | -164.8 inch | -6.66 mil | 27.0 inch | 1.09 mil |
| 800.0 yd | 1221.3 ft/s | 1.09 mach | 1.347 s | -240.9 inch | -8.52 mil | 37.3 inch | 1.32 mil |
| 900.0 yd | 1093.2 ft/s | 0.98 mach | 1.607 s | -340.5 inch | -10.71 mil | 50.0 inch | 1.57 mil |
| 1000.0 yd | 1029.8 ft/s | 0.92 mach | 1.891 s | -469.0 inch | -13.27 mil | 64.8 inch | 1.83 mil |

## Complex Example

Here we define a standard .50BMG, enable powder temperature sensitivity, and zero for a distance of 500 meters, in a 5°C atmosphere at altitude 1000ft ASL.

```python
dm = DragModel(0.62, TableG1, 661, 0.51, 2.3)
ammo=Ammo(dm, Velocity.MPS(850), Temperature.Celsius(15), use_powder_sens=True)
ammo.calc_powder_sens(Velocity.MPS(820), Temperature.Celsius(0))
weapon = Weapon(sight_height=Distance.Centimeter(9), twist=15)
atmo = Atmo(altitude=Distance.Foot(1000), temperature=Unit.Celsius(5), humidity=.5)
zero = Shot(weapon=weapon, ammo=ammo, atmo=atmo)
zero_distance = Distance.Meter(500)
calc = Calculator()
zero_elevation = calc.set_weapon_zero(zero, zero_distance)
print(f'Barrel elevation for {zero_distance} zero: {zero_elevation << PreferredUnits.adjustment}')
print(f'Muzzle velocity at zero temperature {atmo.temperature} is {ammo.get_velocity_for_temp(atmo.temperature) << Velocity.MPS}')
```

    Barrel elevation for 500.0m zero: 4.69mil
    Muzzle velocity at zero temperature 5.0°C is 830.0m/s

## Preferences
In version 2.x.x we changed concepts of settings, there are 2 ways to set preferences

#### 1. To change library default units directly from code use `PreferredUnits` object

```python
from py_ballisticcalc import PreferredUnits, Velocity, Angular, Temperature, Distance

# Change default library units
PreferredUnits.velocity = Velocity.MPS
PreferredUnits.adjustment = Angular.Mil
PreferredUnits.temperature = Temperature.Celsius
PreferredUnits.distance = Distance.Meter
PreferredUnits.sight_height = Distance.Centimeter
PreferredUnits.drop = Distance.Centimeter

print(f'PreferredUnits: {str(PreferredUnits)}')
print(f'Default distance unit: {PreferredUnits.distance.name}')

# Can create value in default unit with either float or another unit of same type
print(f'\tInstantiated from float (5): {PreferredUnits.distance(5)}')
print(f'\tInstantiated from Distance.Line(200): {PreferredUnits.distance(Distance.Line(200))}')
```

#### 2. To change solver global setting use global flags setters
> [!IMPORTANT]
> This way is deprecated and will be removed in a future version, use [InterfaceConfigDict](#3-to-change-solver-interface-setting-use-_config-attribute-for-calculator)
> _globalUsePowderSensitivity no more supports, use Ammo.use_powder_sens instead and Atmo.powder_t
```python
from py_ballisticcalc import *

set_global_max_calc_step_size(Unit.Meter(1))
step = get_global_max_calc_step_size()

# reset global flags to defaults
reset_globals()
```

#### 3. To change solver interface setting use _config attribute for Calculator
```python
from py_ballisticcalc import Calculator, InterfaceConfigDict
config = InterfaceConfigDict(
    max_calc_step_size_feet=1.,
  # cZeroFindingAccuracy= ...,
    cMinimumVelocity= 0,
  # cMaximumDrop= ...,
  # cMaxIterations= ...,
  # cGravityConstant= ...,
  # cMinimumAltitude= ...,
)
calc = Calculator(_config=config)
```

## Units
#### Use new method to set preferred units/settings globally for the venv or the user
Create `.pybc.toml` or `pybc.toml` file in your project root directory _(where venv was placed)_.
Or place this file in user's home directory. _(The file in project root have priority.)_
Use `loadMetricUnits()`, `loadImperialUnits()` or `loadMixedUnits()` to manualy load one of preinstalled pressets.
You can use `basicConfig()` function to load your custom `.toml` file

The references of `.pybc.toml` settings file you can [**get there**](https://github.com/o-murphy/py-ballisticcalc/blob/master/.pybc.toml)
and [**there**](https://github.com/o-murphy/py-ballisticcalc/tree/master/py_ballisticcalc/assets). They include settings for [metric]
(https://github.com/o-murphy/py-ballisticcalc/tree/master/py_ballisticcalc/assets/.pybc-metrics.toml), [imperial](https://github.com/o-murphy/py-ballisticcalc/tree/master/py_ballisticcalc/assets/.pybc-imperial.toml) and 
[mixed](https://github.com/o-murphy/py-ballisticcalc/tree/master/py_ballisticcalc/assets/.pybc-mixed.toml) mode. 
Mixed mode is using metric settings for angular, distance, velocity, pressure, and temperature units, and imperial for diameter,
length, weight and adjustment units.

```toml
# Config template for py_ballisticcalc

title = "standard py_ballisticcalc config template"
version = "2.0.0b4"

[pybc.preferred_units]
angular = 'Degree'
distance = 'Yard'
velocity = 'FPS'
# ... other there

[pybc.calculator]
max_calc_step_size = { value = 0.5, units = "Foot" }
# ...
```

##### Load .pybc.toml presets
```python
from py_ballisticcalc import loadImperialUnits, loadMetricUnits, loadMixedUnits

loadImperialUnits()
loadMetricUnits()
loadMixedUnits()
```
(Use just one of these three methods - only the last one called counts).

##### Custom .pybc.toml
```python
from py_ballisticcalc import basicConfig

basicConfig("path/to/your_config.toml")
```

#### Available manipulations with units
```python
from py_ballisticcalc.unit import *

# Ways to define value in units
# 1. old syntax
unit_in_meter = Distance(100, Distance.Meter)
# 2. short syntax by Unit type class
unit_in_meter = Distance.Meter(100)
# 3. by Unit enum class
unit_in_meter = Unit.Meter(100)
print(f'100 meters: {unit_in_meter}')
# >>> 100 meters: 100.0m

# Convert unit
# 1. by .convert()
unit_in_yards = unit_in_meter.convert(Distance.Yard)
# 2. using shift syntax
unit_in_yards = unit_in_meter << Distance.Yard  # '<<=' operator also supports
print(f'100 meters in {unit_in_yards.units.key}: {unit_in_yards}')
# >>> 100 meters in yard: 109.4yd

# Get value in specified units (as float)
# 1. by .get_in()
value_in_km = unit_in_yards.get_in(Distance.Kilometer)
# 2. by shift syntax
value_in_km = unit_in_yards >> Distance.Kilometer  # '>>=' operator also supports
print(f'100 meters, value in km: {value_in_km}  (value type is {type(value_in_km)})')
# >>> 100 meters, value in km: 0.1  (value type is <class 'float'>)

# Getting unit raw value (a float)
rvalue = Distance.Meter(100).raw_value
rvalue = float(Distance.Meter(100))
print(f'100 meters in raw value: {rvalue}  (raw type is {type(rvalue)})')
# >>> 100 meters in raw value: 3937.0078740157483  (raw type is <class 'float'>)

# Comparison operators supported: < > <= >= == !=
print(f'Comparison: {unit_in_meter} == {Distance.Centimeter(100)}: {unit_in_meter == Distance.Centimeter(100)}')
# >>> False, compare two units by raw value
print(f'Comparison: {unit_in_meter} > .1*{unit_in_meter}: {unit_in_meter > .1*unit_in_meter.raw_value}')
# >>> True, compare unit with float by raw value
```

# Concepts

## Look angle
*Look angle* is the elevation of the sight line (a.k.a., _Line of Sight_, or _LoS_) relative to the horizon.  For flat fire at angles close to horizontal this does not make a significant difference.  When the look angle is significantly above or below the horizon the trajectory will be different because:

1. Gravity is not orthogonal to the velocity
2. Air density changes with altitude, so the drag effects will vary across an arcing trajectory.

The shooter typically cares about the line of sight (LoS): Sight adjustments (_drop_ in the following figure) are made relative to LoS, and ranging errors – and hence [danger space](#danger-space) – follow the line of sight, not the horizon.

The following diagram shows how _look distance_ and _drop_ relate by _look angle_ to the underlying (distance _x_, height _y_) trajectory data.
![Look-angle trigonometry](doc/BallisticTrig.svg)

## Danger Space
Danger space is a practical measure of sensitivity to ranging error.  It is defined for a target of height *h* and distance *d*, and it indicates how far forward and backward along the line of sight the target can move such that the trajectory will still hit somewhere (vertically) on the target.

![Danger Space](doc/DangerSpace.svg)

# About project

The library provides trajectory calculation for ballistic projectiles including air rifles, bows, firearms, artillery, and so on.

The 3DoF model that is used in this calculator is rooted in public C code of [JBM's calculator](https://jbmballistics.com/ballistics/calculators/calculators.shtml), ported to C#, optimized, fixed and extended with elements described in Litz's _Applied Ballistics_ book and from the friendly project of Alexandre Trofimov and then ported to Go.

This Python3 implementation has been expanded to support multiple ballistic coefficients and custom drag functions, such as those derived from Doppler radar data.

**[The online version of Go documentation is located here](https://godoc.org/github.com/gehtsoft-usa/go_ballisticcalc)**.

**[C# version of the package is located here](https://github.com/gehtsoft-usa/BallisticCalculator1), and [the online version of C# API documentation is located here](https://gehtsoft-usa.github.io/BallisticCalculator/web-content.html)**.

## Contributors
**This project exists thanks to all the people who contribute.**

<a href="https://github.com/o-murphy/py_ballisticcalc/graphs/contributors"><img height=32 src="https://contrib.rocks/image?repo=o-murphy/py_ballisticcalc" /></a>

Special thanks to:
- **[David Bookstaber](https://github.com/dbookstaber)** - Ballistics Expert\
*For help understanding and improving the functionality*
- **[Nikolay Gekht](https://github.com/nikolaygekht)** \
*For the sources code on C# and GO-lang from which this project firstly was forked*

[//]: # (## Sister projects)

[//]: # ()
[//]: # (* **Py-BalCalc** - GUI App for [py_ballisticcalc]&#40;https://github.com/o-murphy/py_ballisticcalc&#41; solver library and profiles editor)

[//]: # (* **eBallistica** - Kivy based mobile App for ballistic calculations)

[//]: # ()
[//]: # (* <img align="center" height=32 src="https://github.com/JAremko/ArcherBC2/blob/main/resources/skins/sol-dark/icons/icon-frame.png?raw=true" /> [ArcherBC2]&#40;https://github.com/JAremko/ArcherBC2&#41; and [ArcherBC2 mobile]&#40;https://github.com/ApodemusSylvaticus/archerBC2_mobile&#41; - Ballistic profile editors)

[//]: # (  - *See also [a7p_transfer_example]&#40;https://github.com/JAremko/a7p_transfer_example&#41; or [a7p]&#40;https://github.com/o-murphy/a7p&#41; repo to get info about the ballistic profile format*)

## RISK NOTICE

The library performs very limited simulation of a complex physical process and so it performs a lot of approximations. Therefore, the calculation results MUST NOT be considered as completely and reliably reflecting actual behavior or characteristics of projectiles. While these results may be used for educational purpose, they must NOT be considered as reliable for the areas where incorrect calculation may cause making a wrong decision, financial harm, or can put a human life at risk.

THE CODE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE MATERIALS OR THE USE OR OTHER DEALINGS IN THE MATERIALS.
